Beacon BT150 Hydraulic Press Machine For Stretching Bending And Punching Vertical Press Machine

Introduction

BT-150 Electric Hydraulic Machine is our new setting product which absorbs the advantages of the similar brands both in and abroad after several rounds improvement. With steel-rigid frame of Gate , adjustable work-platform, solid structure and convenient operation, it is widely used in mechanism and automobile’s assembling and dismantling of assembly and setting.
This is a kind of compound oil pump. The piston works in high speed in low pressure, and the maximum rated pressure can reach to Mpa in high pressure.

I.OPERATION WAY
1. Ignite the engineer at the first time to use it ,and check the running way.
2. No load run the engineer ,exclude the air in the oil jar by using the way of return poison twice within the area of mm up and down.
3. Choose the height of work platform according to the size of pts, and insert two poles of bearing the pressure into the round hole separately.
4. adjust the travel: broadcast to manual mode, make the pressure head contact the workpiece, adjust the side travel adjustment parts to the position required by the travel switch light to lock, and then make the cylinder run to the starting position to adjust the travel adjustment parts to the top travel switch light to lock.It is then played into automatic mode, and the machine runs at the set time
5. Time adjustment: open the distribution box and turn the time controller to the required time